broken scope?

[traper]

hey every one i bought a center point 3-9x32 milidot scope last year an i have bin useing it ever since but the other day i put it on my rifle an went to sight it in an i got it perfect on the left to right part but when it came to bring it up some i maxed the dile out putting it up as far as it would go an my rounds were still hitting around the first mili dot down an i cant raise it any more an im only shooting a 22 at about 50 yards. i wanted to know if any one else had this problem an if so how do i fix it

[ArmySGT.]

hey every one i bought a center point 3-9x32 milidot scope last year an i have bin useing it ever since but the other day i put it on my rifle an went to sight it in an i got it perfect on the left to right part but when it came to bring it up some i maxed the dile out putting it up as far as it would go an my rounds were still hitting around the first mili dot down an i cant raise it any more an im only shooting a 22 at about 50 yards. i wanted to know if any one else had this problem an if so how do i fix it

Reset the scope back to zero.

Brass shims of .002 thickness (try Fastenal)

Cut to fit your rear scope mount

place under rear scope mount and tighten down.

This will lower your cross hairs without using the built in adjustments.

Boresight. You may need to add or remove shims.

Then go zero.

[ArmySGT.]

BTW the reason your running out of adjustment is this.

The scope is meant to be zeroed for a target 300 yards away. It has a built in MOA for this.

So essentially you need to buy a .22 scope for a .22 and save this scope for a .30 cal rifle.