BHM's Homesteading & Self-Reliance Forum

Posting requires Registration and the use of Cookies-enabled browser


Go Back   BHM Forum > Search Forums

Showing results 1 to 77 of 77
Search took 0.01 seconds.
Search: Posts Made By: yardburd
Forum: Animals 06-18-2018, 03:59 PM
Replies: 7
Views: 400
Posted By yardburd
Chicken/rabbit co-hab

Thanks, guys. That advice is what I was looking for. Sounds like I should keep them segregated.
Forum: Animals 06-18-2018, 08:50 AM
Replies: 7
Views: 400
Posted By yardburd
Can chickens and rabbits be roommates?

Building a chicken coop/rabbit hutch-over-compost pile structure and am asking if anyone has experience with letting chickens and rabbits co-habitate. Are they compatible or will they fight and/or...
Forum: Self-reliance 06-11-2018, 06:15 PM
Replies: 1
Views: 470
Posted By yardburd
Homestead security product warning

I recently purchased six 12 ga. perimeter trip wire alarms from Fith Ops co.
$30 each = $180. Of the six, NONE worked! The firing pin didn't even dent the primer. I tried different firing pin...
Forum: Health 10-19-2017, 12:01 PM
Replies: 2
Views: 1,182
Posted By yardburd
knee cartilage problem

The Dr. said that I have torn knee cartilage. I do not want surgery, but especially at night the pain/discomfort keeps me awake. I have tried using a pillow, soap between the sheets and ice packs...
Forum: Hands-on 11-02-2015, 01:38 PM
Replies: 7
Views: 6,894
Posted By yardburd
200A breaker

Since it's now a weekday and the folks at Siemans are at work, I decided to give them a call. Turns out that the circuitry inside the breaker forms an "X". The right-side input feeds the left-side...
Forum: Hands-on 10-31-2015, 08:20 PM
Replies: 7
Views: 6,894
Posted By yardburd
200A breaker

This is a brand-new-out of the box breaker. It has the same test results as the one that is installed. The original was removed and tested and tested dead even though it worked, even if erratically....
Forum: Hands-on 10-31-2015, 12:46 PM
Replies: 7
Views: 6,894
Posted By yardburd
200A breaker question: continuity test?

I have a 200A Siemans circuit breaker that apparently has no continuity between the input and output terminals. 200 ohms, 200 megohms, on, off, my multimeter indicates an open circuit. Not good for a...
Forum: Self-reliance 06-11-2015, 10:00 PM
Replies: 1
Views: 6,511
Posted By yardburd
Infrared motion detectors: cheap and effective

If you have concerns about home s3curity, may I suggest the use of battery-powered infrared motion detectors. I put one in the far corner of every room that has a door or window and sleep very...
Forum: Self-reliance 06-09-2015, 05:57 PM
Replies: 56
Views: 28,193
Posted By yardburd
WTSHTF will you be your brother's keeper?

I have lately given much thought to this problem and seek your opinion/answer.
Assume that the worst has happened and you find yourself in the position of being prepared to deal with it. You have an...
Forum: Farm/ Garden/Flowers/ Shrubs/ Trees 04-03-2015, 08:53 PM
Replies: 26
Views: 8,136
Posted By yardburd
Raised bed: my final decision

Thanks to all for the insights and suggestions. I have come to a conclusion. Yes, I will do raised beds, mainly because it is easier to control the soil environment, but I will do it in used tires,...
Forum: Auto/Truck/Other Transportation 01-18-2015, 03:03 PM
Replies: 2
Views: 6,163
Posted By yardburd
Best automotive how-to book yet

I found at a garage sale a complete set of instruction manuals for a Florida State Automotive Vocational course. 18 volumes, thet cover virtually all aspects of automotive diagnosis and repair. In...
Forum: Communications/Computers/Software 12-22-2014, 09:45 PM
Replies: 6
Views: 7,993
Posted By yardburd
Ham License classes

For those of you who might be intimidated by the idea of delving into the magical world of ohms, watts and departure angles, let me offer this opinion based upon my own experience. I purchased, one...
Forum: Farm/ Garden/Flowers/ Shrubs/ Trees 12-09-2014, 06:33 PM
Replies: 26
Views: 8,136
Posted By yardburd
Raised beds: framed vs. un-framed

It's time to replace the 2x10's in my four 32x4 beds. I'm not looking forward to the job. It's a lot of work and EXPENSIVE. So.....I'm looking for the voices of experience here. Are framed raised...
Forum: Farm/ Garden/Flowers/ Shrubs/ Trees 12-02-2014, 12:11 PM
Replies: 15
Views: 5,332
Posted By yardburd
Meadow Creature

Yes, the Meadow Creature is just like a big pitchfork, much like the similarity between a canoe and an aircraft carrier. They both float.
Forum: Farm/ Garden/Flowers/ Shrubs/ Trees 12-02-2014, 09:11 AM
Replies: 15
Views: 5,332
Posted By yardburd
Meadow Creature

The Meadow Creature is a broadfork which resembles a gigantic pitchfork that you stand on to push the tines into the dirt and then push the handles down to break up the soil.
Forum: Farm/ Garden/Flowers/ Shrubs/ Trees 12-01-2014, 09:21 PM
Replies: 15
Views: 5,332
Posted By yardburd
Do not buy a Meadow Creature

It is fall in the North which means that it is Spring here in Florida and I get to try out my new Meadow Creature for the first time. If you really enjoy double-digging or breaking up the soil with a...
Forum: Solar 10-09-2014, 07:13 PM
Replies: 6
Views: 5,898
Posted By yardburd
Solar emp

To 12v man:
In two cases, the controller was mounted on the back of the panel. The third case involved 3-4 ft. of connecting wire. Have since found out that memory in my ham radio and scanner were...
Forum: Solar 10-07-2014, 09:25 PM
Replies: 6
Views: 5,898
Posted By yardburd
Solar emp anyone?

Last Sep 10th, my Dish satellite service was erratic all day long, my grid low-voltage alarm kept going off and all three of my solar charge controllers died. Coincidence? I'll bet not. There were...
Forum: Recipes 08-03-2014, 03:45 PM
Replies: 1
Views: 1,837
Posted By yardburd
Toffee cleanup

Just finished my first batch of homemade toffee. WOW! Every bit as good and a ton cheaper than my favorite commercial brand. Problem is: how do you clean up the candy concrete that is left over in...
Forum: Recipes 07-01-2014, 09:08 AM
Replies: 8
Views: 3,356
Posted By yardburd
juicing pulp

On a hunch, I tried putting some in my bird feeder. I thought that parrots were the only birds that could talk. You never heard such foul language come out of the mouth of a cardinal or a variole....
Forum: Recipes 06-30-2014, 10:15 PM
Replies: 8
Views: 3,356
Posted By yardburd
Juice pulp

I should have been more specific. The stuff I juice, kale, collards, broccoli, mustard, carrot tops and cabbage, are rather strongly flavored and tend to overpower soups, stews, etc. I'm still open...
Forum: Recipes 06-28-2014, 05:07 PM
Replies: 8
Views: 3,356
Posted By yardburd
Is there a use for leftover juicing pulp?

Every morning I pull something (collards, kale, carrots, beets, etc.) out of the garden and juice it for breakfast. There is always a cup or three of pulp left over. I have been tossing it into the...
Forum: Homesteading 06-24-2014, 10:06 PM
Replies: 24
Views: 8,057
Posted By yardburd
Be careful what you ask for......

Be careful what you ask for. Thirty years ago, when I was young and even more stupid than I am now, I decided that I wanted a homestead, not a tract home. Five backbreaking years of every weekend,...
Forum: Tractors 06-21-2014, 05:37 PM
Replies: 4
Views: 7,621
Posted By yardburd
Old tractor restoration "must have"

Of necessity (1960 Case 430) I started buying books on old tractors and came across a series of books by Roger Welsch. "Rusty knuckles and busted tractors" is one. It provides humor, philosophy and...
Forum: Farm/ Garden/Flowers/ Shrubs/ Trees 06-20-2014, 10:09 PM
Replies: 3
Views: 2,028
Posted By yardburd
Easier way?

I have more elderberries than I can harvest, but I do my best to let none of them go to waste. The birds help. Presently, I use a common dinner fork to comb the berries from their stems. I start at...
Forum: Farm/ Garden/Flowers/ Shrubs/ Trees 05-22-2014, 08:29 PM
Replies: 3
Views: 2,027
Posted By yardburd
Broadfork identification

So sorry! My error. It's a Treadlite, not a Treadwell and if you search "broadfork" on Amazon, it's the first item.
Forum: Farm/ Garden/Flowers/ Shrubs/ Trees 05-22-2014, 05:04 PM
Replies: 3
Views: 2,027
Posted By yardburd
Treadwell broadfork

FOUND IT! It's a Treadlite, not a treadwell!
search "broadfork" on Amazon. It's the first one.
Forum: Conversations 05-20-2014, 09:25 PM
Replies: 18
Views: 5,702
Posted By yardburd
Neighbors

A common problem. We've lived here between a national forest and a swamp for nearly 30 years. People from Miami built a home a couple of years ago and immediately started complaining to the Sheriff...
Forum: Farm/ Garden/Flowers/ Shrubs/ Trees 05-18-2014, 09:53 AM
Replies: 3
Views: 2,027
Posted By yardburd
Broadfork identification

I was impressed by a broadfork I saw at an auction and later decided to get one. I can't find anywhere the one I saw and hope someone will recognize it. It was all steel, blue, and the most important...
Forum: Reloading & Benchwork 08-03-2013, 04:32 PM
Replies: 12
Views: 8,897
Posted By yardburd
Thanks alot, Army Sgt. Great website. Enough to...

Thanks alot, Army Sgt.
Great website. Enough to scare me into doing the old way. A few FPS isn't worth the risk.
Thanks again,
Yardburd
Forum: Reloading & Benchwork 08-02-2013, 04:09 PM
Replies: 12
Views: 8,897
Posted By yardburd
Safe way to make black powder?

Getting real tired of paying full price for black powder and am ready to make my own. I read that the finer the mix, the better and more reliable the product. My question is: I have a rock-polishing...
Forum: Hands-On How-To 04-06-2013, 07:00 PM
Replies: 2
Views: 4,347
Posted By yardburd
Chainsaw problem

Son-of-a-gun! I logged on to offer a solution to this exact problem! I had two Poulans and a Husquvarna with similar symptoms. I don't know why, maybe it's the alcohol in the fuel, but fuel lines...
Forum: Plants 11-15-2012, 09:30 PM
Replies: 12
Views: 6,055
Posted By yardburd
The right tiller

Hello, Ozark
I think that I might be able to help you here. Having owned front tine, rear tine, tractor PTO mounted rototiller and garden tractor rear tine tiller, I can heartily recommend both the...
Forum: Pets 09-05-2012, 02:04 PM
Replies: 5
Views: 2,953
Posted By yardburd
Orphan cottontails

Thanks for the help. I am checking their status daily by weighing them and believe that the mother is coming back at night (or sometime) as they are gaining, not losing. They appear active and plump,...
Forum: Pets 09-04-2012, 08:17 PM
Replies: 5
Views: 2,953
Posted By yardburd
Orphan cottontails-NEED HELP FAST!

While weeding my garden I uncovered a nest of three young cottontail rabbits. Too late to save the nest so I did the best I could at reconstructing it. Not sure if Mother is returning now and am...
Forum: Health 06-12-2012, 11:29 AM
Replies: 2
Views: 2,795
Posted By yardburd
$40 first aid book available online for FREE!

"The Ship's Medicine Chest and Medicine At Sea", a 400-page text intended for use by sailors at sea where no hospital or EMT's are available, sells on Amazon for $40. You can download a free copy at...
Forum: Conversations 04-22-2012, 07:02 PM
Replies: 19
Views: 6,446
Posted By yardburd
How do you find kindred spirits?

How do YOU find kindred spirits? We (wife and I) have been living the homestead life for 30 years now and have yet to find ANYONE who shares our interests and would make interesting conversation. We...
Forum: Rifles/Shotguns 12-24-2011, 07:32 PM
Replies: 6
Views: 5,711
Posted By yardburd
Added picture, details

I have added a picture to the original post. Subject rifle is a brandless Chinese air rifle that was a rusted junker. All I did to the stock was give it a light sanding with 220 grit to get rid of...
Forum: Rifles/Shotguns 12-22-2011, 10:53 PM
Replies: 6
Views: 5,711
Posted By yardburd
Refinishing a stock? Try this

Next time you find yourself refinishing a rifle stock, try this treatment. Sand the stock to give it "tooth" and apply two light coats of spray-on truck bed liner. It comes out in large drops which...
Forum: Conversations 12-22-2011, 06:41 PM
Replies: 6
Views: 3,064
Posted By yardburd
Have a night vision scope?

This is too weird! I want someone else to verify what I see. Granted, you have to have a night vision scope, monocular, etc. to do this, but I would like to have someone verify that I am not nuts. Go...
Forum: Reloading & Benchwork 12-19-2011, 12:26 PM
Replies: 19
Views: 16,964
Posted By yardburd
Should wax be used for rust-proofing?

Living here in sunny, humid Flo0rida, I find it nearly impossible to my firearms rust-free. It has occurred to me that a paste wax might do a better job of protecting from moisture than does oil or...
Forum: Tractors 11-14-2011, 07:02 PM
Replies: 1
Views: 3,377
Posted By yardburd
Hydraulic fluid booster/sealer. Any good?

While in the store to buy hydraulic fluid for my tractor's drinking habit, I saw some stuff called "Hydraulic Fluid Booster and Sealer". I was tempted to try it, but at $30/bottle, it was too rich a...
Forum: Plants 11-14-2011, 06:57 PM
Replies: 10
Views: 9,968
Posted By yardburd
Rooting hormone: good? Bad? Recipe?

What is your opinion of rooting hormones? Does Rootone work for you or not?
Do you have any cheap or homemade rooting compounds/recipes? I'm trying to root rosemary cuttings with no luck.
Thanks,...
Forum: Communications/Computers/Software 11-01-2011, 03:30 PM
Replies: 8
Views: 4,563
Posted By yardburd
Lightning arrester connector

12Vman,
You nailed it! Thanks for all the help guys. This site never fails to please!
Thanks again,
John
Forum: Communications/Computers/Software 10-31-2011, 03:38 PM
Replies: 8
Views: 4,563
Posted By yardburd
12V Man, Very close to what I'm looking for....

12V Man,
Very close to what I'm looking for. Most importantly, I have been looking for bonded connector, grounded shell connector, etc. Now I'll try lightning arrestor.
Will probably make the...
Forum: Communications/Computers/Software 10-30-2011, 11:08 PM
Replies: 8
Views: 4,563
Posted By yardburd
unidentified connector

Thanks. I tried them, no luck.
Forum: Communications/Computers/Software 10-30-2011, 09:02 PM
Replies: 8
Views: 4,563
Posted By yardburd
Can anyone identify this connector?

I need help to identify a type N connector and steer me to a vendor. I have five of these and need a fourth. Description as follows:
Straight in-line connector, type N
Male on one end, female on...
Forum: Communications/Computers/Software 09-01-2011, 09:27 PM
Replies: 5
Views: 4,227
Posted By yardburd
Antenna grounding scheme - why wouldn't it work?

Have read all I can get my hands on concerning antenna grounding and have come up with a scheme which I think should work like a charm. It is:
Instead of driving a copper or copper-plated rod into...
Forum: Homesteading 05-26-2011, 04:53 PM
Replies: 11
Views: 4,356
Posted By yardburd
I am a radio addict and have somewhere beteen 8...

I am a radio addict and have somewhere beteen 8 and 15 radios. Most are Sangean, Panasonic or Radio Shack (Sangean). I have learned that these are the most efficient brands. All are AM/FM/SW. I have...
Forum: Communications/Computers/Software 04-05-2011, 11:23 PM
Replies: 13
Views: 11,363
Posted By yardburd
Testing 50 ohm coax cable resistance

I got a real deal on a roll of new RG-8 coax cable at a garage sale and wanted to test it before I hooked it up to my radio. Used my RS multimeter and found no shorts between shield and conductor...
Forum: Communications/Computers/Software 02-01-2011, 09:34 PM
Replies: 4
Views: 3,935
Posted By yardburd
Need advice: Which VHF/UHF HT should I avoid?

Newbie ham needs advice. I have my license but know SQUAT about choice of radio. Will get VHF/UHF HT now, HF later. I know that everyone has their favorites, but I am trying to avoid buying a boat...
Forum: Frugal Living 12-07-2010, 09:37 PM
Replies: 2
Views: 3,197
Posted By yardburd
Good stuff, cheap, cheap, cheap!

I recently discovered a local "hauler's" auction. Boy, wish I had found this resource years ago! I save a ton of $ on everything from food to power tools.
How 'bout a complete, working Shopsmith for...
Forum: Preparedness/Survival Skills/BOBs/Kits/Gear 09-09-2010, 10:17 PM
Replies: 367
Views: 89,493
Posted By yardburd
SAigns of the times

For what it's worth:
Stopped into the Taco Bell last Wed. around noon. My wife and I were the only two customers. The manager and help were standing around with nothing to do. Did get fast service....
Forum: Rifles/Shotguns 06-03-2010, 09:31 AM
Replies: 10
Views: 18,574
Posted By yardburd
Night vision rifle scope?

I've decided to buy a night vision scope and am seeking advice from anyone out there who has some experience with them. Is there one that you recommend? Are there any which I should avoid. Am looking...
Forum: Rifles/Shotguns 05-26-2010, 08:38 PM
Replies: 3
Views: 5,707
Posted By yardburd
.30 M1 carbine stock length

I just acquired two .30 M1 carbines and am happy with them except for the length of the stock. I'm kinda' tall and these carbines fit me like a "youth gun".
Have the stocks been shortened? Both guns...
Forum: Reloading & Benchwork 04-26-2010, 10:25 PM
Replies: 11
Views: 6,876
Posted By yardburd
I am surprised that anyone reloads for a Glock....

I am surprised that anyone reloads for a Glock. My son bought a .40 and when he brought over some brass to be reloaded, I found that every single case was bulged beyond repair due to the long throat...
Forum: Preparedness/Survival Skills/BOBs/Kits/Gear 04-26-2010, 10:13 PM
Replies: 3,110
Views: 893,806
Posted By yardburd
Most of the people reading this post are not old...

Most of the people reading this post are not old enough to remember October, 1962. We came within 17 minutes of total SHTF. I was there, witnessed that. After the Air Force, I worked for a company...
Forum: Conversations 03-15-2010, 07:59 PM
Replies: 44
Views: 13,090
Posted By yardburd
worst job

Try this one. Working for a precast concrete outfit in Omaha (cold). Get up at 2:30 AM. Be at work at 3:30AM. Strip forms off of concrete poured the previous day. Clean the forms. Set up the forms....
Forum: Preparedness/Survival Skills/BOBs/Kits/Gear 02-28-2010, 08:08 PM
Replies: 86
Views: 16,744
Posted By yardburd
It occurs to me that city dwellers invading the...

It occurs to me that city dwellers invading the countryside in search of game might not be a bad thing. I hear that roast leg of lawyer is not that bad. (If you can get past the ratty smell)
Forum: Homesteading 02-26-2010, 10:38 PM
Replies: 84
Views: 95,785
Posted By yardburd
Re: styrofoam insulation. Critters (rats) will...

Re: styrofoam insulation. Critters (rats) will eat the stuff like candy. They will also leat through a 1x12 to get to it. They will also eat the insulation off of wire and eat the wire (stranded)...
Forum: Homesteading 02-22-2010, 09:27 PM
Replies: 84
Views: 95,785
Posted By yardburd
Been there, done that. I built the remote home I...

Been there, done that. I built the remote home I now share with my wife and have the following advice based upon my experience. First, I had large quantities of building materials delivered to the...
Forum: Preparedness/Survival Skills/BOBs/Kits/Gear 02-22-2010, 08:05 PM
Replies: 86
Views: 16,744
Posted By yardburd
When I think of what hunting will be like...

When I think of what hunting will be like post-WTSHTF, it brings too many memories of being the hunted, not the hunter. If you really need meat, I suggest raining rabbits or chickens. They can be...
Forum: Rifles/Shotguns 02-21-2010, 08:28 PM
Replies: 141
Views: 59,187
Posted By yardburd
Best self defense weapon? Whatever you have put...

Best self defense weapon? Whatever you have put 5,000 rounds through and can hit the target with your eyes closed. Literally. Would you rather be hit with a .22 or missed by a .44 Mag?
Forum: Jobs/Business/Investing 12-22-2009, 09:38 PM
Replies: 1
Views: 2,933
Posted By yardburd
Survival gardening

I have an issue with the opinion that a garden can be grown in any soil.Maybe so up North, but in most places in the South, you will get one, maybe two years out of any soil before the nematodes take...
Forum: Jobs/Business/Investing 11-25-2009, 10:32 AM
Replies: 3
Views: 3,224
Posted By yardburd
How fast will the dollar fall?

Check out the website usdebtclock.org and see you can figure out any way that we can escape a dollar crash. The rate at which our debt is increasing cannot be sustained. When, not if, it comes, will...
Forum: Farm/ Garden/Flowers/ Shrubs/ Trees 11-16-2009, 09:53 PM
Replies: 7
Views: 3,163
Posted By yardburd
Nematodes

Tires may be OK for nematode-resistant crops, but ANYTHING which comes
in contact with the soil is history. Ask my carrots, sweet potatoes, peanuts,
eggplant, etc. etc. If it's not OFF THE GROUND,...
Forum: Farm/ Garden/Flowers/ Shrubs/ Trees 11-16-2009, 07:51 PM
Replies: 7
Views: 3,163
Posted By yardburd
Southern gardeners only

This post applies to only those gardeners who raise stuff below the Mason-Dixon Line. We are afflicted with nematoades. Try as you might, you will NOT avoid them. As long as you garden in THEIR...
Forum: Reloading & Benchwork 11-09-2009, 07:37 PM
Replies: 6
Views: 6,601
Posted By yardburd
Bullet lube question

I use both conventional lube and the Lee tumble lube systems. My question is: The Lee system is so simple that I ask the question "Why would anyone use the conventional dunk-and-size" method? I don't...
Forum: Reloading & Benchwork 11-06-2009, 11:28 PM
Replies: 35
Views: 19,779
Posted By yardburd
Savage stuck case problem

I had the same problem with my 300WM Savage. I ended up cracking the bolt handle in my effort to clear the round. I found that the problem went away when I started loading to a little below the...
Forum: Reloading & Benchwork 11-06-2009, 11:22 PM
Replies: 3
Views: 5,179
Posted By yardburd
Bullet mold anti-stick trick

Ever have your cast bullets stick in the mold even though you have done the candle smoke trick? Try dry graphite.It's available at your local hardware store.
Use a small brush to dust your mold and...
Forum: Firearms/Weapons 10-22-2009, 04:39 PM
Replies: 26
Views: 16,716
Posted By yardburd
Gun safe recommendation

Something new has happened since I posted this question. An acquaintance has (had) a really big (1,000lb) gun safe which got me on this trail to begin with. Last week, while he was at work, someone...
Forum: Firearms/Weapons 10-19-2009, 07:53 PM
Replies: 26
Views: 16,716
Posted By yardburd
gunsafe recommendations?

Civilization has done reached the swamp.
So many people have moved in around me that I no longer
feel safe counting on my isolation to keep me safe from
those who don't want to work for what they...
Forum: Tractors 10-01-2009, 10:44 PM
Replies: 11
Views: 9,381
Posted By yardburd
10% Ethanol gas corrosion problem!

I just got back from the parts dealer, $190 lighter. Had a big problem with my riding lawnmower. It wouldn't start reliably and when it did, it ran erratically. I traced the problem to the...
Forum: Jobs/Business/Investing 09-29-2009, 09:40 PM
Replies: 20
Views: 7,623
Posted By yardburd
Dollar is probably doomed

I had to finally get off the fence and make a decision regarding where my
nest egg is going to be. Couldn't convince myself that there is ANY future
in the dollar. It's gotten so cheap that they...
Forum: Food 09-19-2009, 06:26 PM
Replies: 28
Views: 7,670
Posted By yardburd
Oh, yeah?

I get a kick out of those who think of gardening as putting seeds into the
ground and waiting for a harvest. I have been doing this for 40+ years and
consider any year which I get a 40% harvest is...
Forum: Breads & Grains 08-27-2009, 06:58 PM
Replies: 39
Views: 17,204
Posted By yardburd
I don't believe that hand-ground flour is cheaper...

I don't believe that hand-ground flour is cheaper than what you get at the market, but being able to do so sure gives you a sense of security of you have 100 or so lbs. of wheat stored. I have a...
Forum: Breads & Grains 08-24-2009, 09:23 PM
Replies: 2
Views: 2,773
Posted By yardburd
Jackie's Fail-proof white bread

If you haven't done so yet, go to page 24 in the Backwoods Home Cooking book and try Jackie Clay's Fail-proof white bread. I've been baking my own bread for 30+ years, trying several hundred recipes...
Showing results 1 to 77 of 77

 
Forum Jump
All times are GMT -2. The time now is 07:24 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
© 1996 to Present. Backwoods Home Magazine, Inc.