BHM's Homesteading & Self-Reliance Forum

Posting requires Registration and the use of Cookies-enabled browser

Old 09-22-2013, 11:13 PM
Tim Horton's Avatar
Tim Horton Male Tim Horton is online now
Grand Master Pontificator
Join Date: Sep 2002
Location: Deep in the BC Bush
Posts: 6,018
Default Lee Loader.......

Way back when I was a teen, a couple brothers about my age had a Lee Loader for 410 shot shells..... They reloaded a bunch of old paper shells till they were so frazzled they used masking tape to hold them together.... But they used them in an old single shot break open gun.....

I have a line on an almost new HR 1871 Handy Rifle with a 30-30 barrel.... I'm considering it for the fact that you can get barrels of other calibers...

And for instance with the 30-30, you can load pointed bullets for the single shot....

Anyone have experience with a Lee Loader in a bottle neck rifle caliber ??
I don't think 30-30 would be hard to load for and keep accurate as a 30-30 needs to be.... But how do Lee Loaders work out for say a 308, 30-06, 7mm Rem Mag.... ?? Something with some more punch...

Now I also realize a Handy Rifle in 7 Mag or 300 Win will be a brute to shoot.... But not much more than a Ruger single shot......

Anyone with experience with bottle neck Lee Loaders ???
Always fresh.
Keep your stick on the ice. Red Green
Reply With Quote
Old 09-23-2013, 10:28 AM
Nickathome Nickathome is offline
Senior Member
Join Date: Aug 2005
Location: Pa
Posts: 392

I have one in .303 caliber. I haven't used it in years. It will only resize the neck if I remember correctly, so if you have a couple rifles in the same caliber, I'd recommend you keep aside all cases to be used in the Handy rifle so they don't get mixed up with ones you may use in the other guns. I remember making some pretty decent loads with my Lee Loader. They're a little time consuming to use, but you can't get a simpler loading tool.
Reply With Quote
Old 09-23-2013, 01:08 PM
MichaelK Male MichaelK is offline
Master Pontificator
Join Date: Oct 2010
Location: Sierra foothills
Posts: 552

You can get the Lee Loader in the more popular rifle calibers, though not everything. Yes, you can get .308, .30-06, 7mm mag. act. Here's a link to buy a .308.
I'm an O negative, Aries, ISTJ, Rat.
Reply With Quote
Old 09-23-2013, 09:27 PM
hunter63's Avatar
hunter63 hunter63 is offline
Master Pontificator
Join Date: Jan 2005
Location: SE/SW WI
Posts: 635

Lee Loaders come in many calibers.....although not as many as in the past.
The shotgun version we not made by Lee, (I called them for the manual for 20 ga) but were contracted out.

Loaded 7 mag for years, as well a .225 Win.....and as long as they were from your gun to start with, no problems, as they do just size the neck.

Had a problem with some brass I picked up at the range for the 7 mag...was fired in a Browning auto loader....some wouldn't chamber at all and many were hard to chamber.

Also check case length closely....

Handy Rifles (later ones are available is plenty of calibers as well) need to check serial number with the recommended series that the factory will fit.
Phone call will work...

Won't seen to many Mag calibers, as the barrel need to be longer to get the speed for magnums from the slow burning powders.

So you can get a 7 mm -08 but not a 7 mm mag.

Did see a .300 Blackout Handi at the last show I was at....didn't know they made them....LOL
Reply With Quote
Old 09-24-2013, 10:10 AM
oeb oeb is offline
Senior Member
Join Date: Mar 2009
Posts: 280

For years I've satisfactorily used Lee Loaders for 30-30 and for 303 Brit on brass used repeatedly but fired only in the same rifle. I get a LOT of reloadings out of my brass by loading light and not resizing full length, however, I've been known to get a buddy to do that for me a time or two. Wasn't necessarily needed but I was getting a bit nervous about length and chambering in the Marlin 30-30 lever action. The bolt gun never complained. Single shots shouldn't be a problem either for any reasonable life of brass in all your rounds. The only time I get jitters with the Lee Loaders is setting primers with a hammer. Had one go off-- wasn't too spectacular but startled me so I've just bought a Lee primer tool: the hand squeeze thing-- it's sweet.

Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -2. The time now is 04:45 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
© 1996 to Present. Backwoods Home Magazine, Inc.